Ykw/Gyk Series of High Speed Flexo Ink Corrugated Paperboard Printing Slotting Die Cutting Machine

Function and characteristics:

1. All the main electric appliances of the whole machine adopt the product of Schneider made in France.

2. Adopt wheel lead-edge feeder system. 

3. Adopt helical gear driving,the gears are made from high frequency quenching and after grinding processing.

4. The gears adopt shower type circular lubricating and with oil balance function.

5. Adopt inverter motor to drive and adjust the speed by frequency conversion within the certain scope.

6. Printing slotting and die cutting electric phase adjusting mechanism.Planet type gear structure 360 degrees.(It can be adjusted while revolving and stopping).resolution response rate is 0.2mm.

7. Adopting the mould piece designing.The multi-color printing machines can be combined and linked in any way.

8. Each unit adopt touch screen control.

Function of Feeding Department:

1. Paperboard feeding adopt leading edge, paperboard feeding is more accurate. 

2. It can send the paperboard continuously or by partition equipped (with counting device ).

3. Electric controlling the clutch of the machine platform and installed alams in order to assure the safe of the operating personnel while the bell rings constaintly during marching . 

4. The electrical machinery of the main engine starts the protective device.(If the machine has not been locked.the main engine can not start revolving.)

5. The separating electrical machinery starts the protective device.(If the machine has been locked you can not start the separating electrical machinery.)

6. It can adjusting feeding paper running ,relieve feeding glue roller’s preesure . 

7. dust collecting plant, brushes and the air blower can clear the dust and the paper scrap of the paperboard surface. 

8. Back baffle、left and right baffle adopt electric controll. 

9. With side pusher function. 

Function of Printing Department:

1. The printing roller and trace pressing roller adopt High quality steel material. To grind the surface and do the hard chrome plating.

2. All drive roller adopt dynamic balance correction, so the revolving is steady.

3. To load and unload the printing plating and step on the switch. Electric controlling the positive and negative revolving.

4. With ink shortage alarm function.

5. Phase-adjusting mechanism, planet type gear structure, electric digital control.

6. Printing phase fixed device, pneumatic brakes. While the machine separates or the phase is adjusting, the brakes can restrict the revolving of the machine platform and keep the fixed point of the original gears’ position.

7. Rubber roller:The surface of the roller is steel pipe which is packed by the wear-resisting rubber. Adopting medium and high special grinding the rubber roller has effective ink-spreading optional doctor blade system.

8. The oil roller adopts high precision hard chrome plating net-grain roller.

9. Installed with ink roller rotation electrical machinery to the main engine’s drying up while its stopping.

10. The lateral movement of the plate roller adopt electric adjustment.

Function of Slotting Department:

1. Slotting phase adjusting mechanism, planet type gear structure, electric digital control.

2. Opening slot, pressing line, distance putting board type, four axles must be adjusted by hand synchronously. Chest height must be adjusted by hand synchronously.

3. The width of the slotting knife is 7.0mm and of alloy steel material. Under heat treatment blade grinding, hackles and double blades side repairing knife are very sharp and long using life.

4. The part of slotting can install the punches and buttons beating equipments.

5. Optional four knives mould die cutting unit.

6. Optional computer PLC to adjust the carton size.

Function of Rotary Die Cutting Department:

1. The cushion roller adopts mechanical camdrum portable structure(40mm).

2. The gap between the cushion roller and the cutter mould roller adopts electrical adjustment. When stopping feeding paper, the soft roller will rise automatically; When working, the soft roller will return to the working position.

3. Adopt compentating system. No matter how much the cushion diameter changes, the speed of the cushion compentate and follow automatically, without adjustment by man.

4. With restoration for cushion after wear and tear. Keeping the surface of the cushion smooth.

5. Optional free version slotting function.

Hydraulic Stacker:

1. Bin arm using pneumatic operation, manual control.

2. Bedtable lifting, hydraulic station double hydraulic cylinder drive, to ensure the safety of operators.

3. Stacking, using a flat wrinkles climbing belt and steel clamping device, so that the stacking order and tidy.

4. Hold paper feeder can be adjusted to hold the opening width, with a batch accumulation function.

5. The use of side shoot baffles to ensure more orderly stacked cardboard.

6. Electric enforce the use of PLC programming control, independent of the operating electric box.

7. Optional vibration stripping and lateral waste function.

8.Stacker height: 1600mm.